[caption id="attachment_1167" align="alignnone" width="732"] MACHINE'D HOG OVERSIZED PUTTER SHAFTS IN STEEL AND GRAPHITE[/caption]

SOME FEATURES

• XX Stiff for greater accuracy
• Ultra low torque for increased forgiveness
• Super stable for more consistent stroke
• 0.600" non-tapered outside diameter
• Soft yet solid feel

Introducing one of the latest and greatest innovations from MACHINE.  The MACHINE'D HOG Oversize putter shafts are here to surely and BOLDLY improve your putting game.

ALL PRODUCTS MADE IN THE USA

[caption id="attachment_1162" align="alignnone" width="732"] MACHINE'D HOG OVERSIZED PUTTER SHAFTS SHOWN HERE ON MACHINE M10 AND M12.5 MODELS[/caption]

PUTTER RELEASE MATRIX

MACHINE SHOP Putters: Made at Dogleg Right’s Custom Putter Shop, with a host of customization options including head and hosel material, plating and finish combinations; lie; length; as well as special shafts and grips.

MACHINE PROTO Putters: Machine Prototype putters are extremely rare, often one-of-a-kind creations and innovations from Dave Billings, used to explore and test new concepts in design, construction and / or finish. These are usually made in less than five pieces total, ever, and are tested with some very special friends whom Dave works with, trusts and highly respects. Minor modifications are designs and made into subsequent models if and when they get added to the lines. Therefore, the original PROTOs are discernible, rare and unique.

MACHINE ART Putters: Machine Art putters are Dave Billings’ most creative, artistic and expressive pieces, as well as the putters he puts the most time, (and a little blood sweat and tears into as well). From special materials, one of a kind stamps, unique grinds, extravagant hand hammered peening, large amounts of melting, wild hand torched flaming and numerous other artistic touches, these rare and unique ART Putters are sure to find a prize spot in a few lucky putter aficionado’s collections.

MACHINE GARAGE Putters: Finished by Hand by Dave Billings in his Garage, where he does his most creative work, and puts in countless hours making sure each of these putters is “just right!” From special grinds, melted edges, select hand hammered peening, special finishes, including hand rubbed satin, hand blued, and hand flamed Rainbow, to special “signature” stamps, to hand bent hosels. These are just some of the options available with MACHINE Garage Putters.

MACHINE TOUR Putters: Just as the name implies, TOUR putters are built specifically for TOUR players to try and use. Sometimes these are tested by players, and then passed on to collectors and loyal customers after coming back from their gypsy life out on TOUR. Hopefully a few will make their way into TOUR players’ bags, and on to help those players do great things!

Machine Starter offers limited custom options for this project.  Contact us.

ALL PRODUCTS MADE IN THE USA

TIMELINE

JANUARY 2023: Launch campaign
JANUARY 2022: Use prototypes/samples for performance feedback from professionals and a small player test panel
FEBRUARY 2022: Close campaign and submit final specifications/quantities for manufacturing of initial production run
FEBRUARY 2022 : Limited quantity production run
FEBRUARY 2022: Delivery of parts to first backers

[caption id="attachment_1317" align="alignnone" width="709"] A SMORGSBORD OF MACHINE HEAD, SHAFT AND HOSEL OPTIONS.[/caption]

GROUP PHOTO EXPLANATION

Background, Putters, Left to right:

1. Custom M12.5 Flipper - 303 stainless head with Morning Dew satin finish (“MDsf”) with Standard Length, Full Offset Plumber Neck Hosel in 303 stainless, Custom Mokume Gane Mini-Megalodon flange (standard down position) with Custom Parallel-Cut Cavity with milled Ball-Cut relief. Fitted here with Grey Ano X-Changer hosel adapter and and oversized stepless steel “Semi-Fat HOG” shaft.
2. Custom M12.5 Flipper - 303 stainless head (lightly polished) with Full Slant Half Offset Hosel in 303 ss MDsf, Custom Mini-Megalodon flange in MDsf (Flipped, raised-up position) with Custom Parallel Cut Cavity with 3D milled Sightlines. Fitted here with Candy Red Ano X-Changer hosel adapter and BTG Stability Shaft with Frosted steel tip.
3. Custom “shaft-over” Full Offset Long Plumber Neck hosel in 303 ss, MDF and glued Stepless Steel shaft
4. Full Offset Long Plumber Neck (shaft-in) in 303 ss with MDsf and glued in stepless steel shaft
5. “Standard” M12.5 Flipper in 303 stainless (MDsf), Delta Mod adjuster and Medium Short Square Cut Plumber neck with Upper Delta Mod, Grey Ano X-changer adapter and MACHINE’d HOG shaft by UST in standard black.
6. Stubby Square Cut Full Offset Plumber neck, Clear Ano X-Changer hosel adapter and “Tour Fat HOG” shaft in Chromed Steel.
7. “Standard” M12 Converter in 303 stainless (MDsf), Standard Length Square Cut Plumber neck (light polish) with Clear Ano X-changer adapter and MACHINE’d HOG shaft by UST in Woven black. Standard Black Medallion.
8. Modular Center Shaft (shaft-over) hosel with glued BTG Stability Tour Black Shaft

Mid-Ground:

 Center front:  Loose Upper Delta Mod (available in 303 ss in 0.5˚, 1.0˚ and 2.0˚ degrees of change)

Center back:  Loose Lower Delta Mod (available in 303 ss in 0.5˚, 1.0˚ and 2.0˚ degrees of change)

 Foreground:

Front to Back:

1. MACHINE’d HOG TOS Super-Stable XX-stiff, Ultra Low Torque shaft in Black Woven Graphite and fitted with a HOG-sized Black Leather Sewn OS Non-Tapered Grip.
2. Aerotech Steel Fiber Proprietary MACHINE Putter shaft
3. Aerotech Steel Fiber Proprietary MACHINE Putter shaft with “Tip-stiffener” shaft-in X-changer adapter in 303 ss
4. Black BreakThrough Golf Stability Tour shaft with Clear Ano Exchanger adapter (fits X-changer adapted hosels).
5. Medium Short Full Offset Square Cut Plumber Neck in 303 ss (MDsf) with standard steel stepless chromed steek putter shaft (glued in).

MACHINE Starter is in the process of changing the way golfers can purchase equipment.
Risks and challenges
This is our second crowd funding project, having successfully manufactured and delivered all the products in the first launch.  We have extensive experience bringing golf products to market. Over the last 27+ years, we have dealt with a wide range of issues in the golf industry and have successfully navigated many different types of challenges. We are committed to making the very best products available anywhere and fulfilling your orders in a timely manner, so you can enjoy them for years to come.

[caption id="" align="alignnone" width="2560"] MACHINE M12.5 PUTTER WITH MACHINE'D HOG OVERSIZED PUTTER SHAFT AND OPTIONAL DELTA MODS[/caption]

Some potential issues include:

Supply chain delivery issues (primarily components)-
Ramping up capacity has many moving parts. We have selected a group of suppliers that have proven track records in the golf industry. However, it is to be expected that improvements in process and efficiency will need to be made as we transition from prototype quantities to higher volumes.

Acts of God or events that are outside our control-
Delays from transportation strikes or problems due to extreme weather conditions are examples that are certainly in the realm of possibility. We have added some buffer time into our schedule. However, it's possible that we encounter something that could impact delivery dates.
If there is an issue that will impact you (our backers), we promise to keep you informed on status and do whatever it takes to solve the problem in the best way possible.

Questions about this project? Check out the FAQ tab at the top of this page.